Applications

Let all users be precision machining "participants"

acrylic polishing

2022-9-9

This paper takes high-speed polishing of acrylic plexiglass as an example, and applies it to high-speed motor polishing of material cross-section to achieve a mirror effect. It can be used for metal polishing, woodworking board, PVC material section polishing, and it can be used in occasions where high precision is required for the polishing surface.
Optional model: HM495-12/3.7SCF
How to use: The chuck is used to install the cutter head, and the cutter head is equipped with 6 tools with different depths. The cutter head is 300MM so far, and the total weight is about 3Kg
Application background:
1. The existing process of processing finished products has low efficiency.
2. The precision of the machined section is poor, and there is an arc-shaped knife edge mark after the end face is machined.
3. There are residual bubbles in the section, and a small amount of residual thorns at the water chestnut.
application solution:
Spindle power selection YSAhigh speed motor3.7KW12000 rotary model, with the special tool to fix the cutter head, and install 6 cutting knives. Do 40,000 rotation balance tests on the whole. The advancing speed of the polishing component is adjusted to 1S advancing a distance of 100mm.
The main technical parameters:
Power Requirements AC380
Machinable size 2500mm(L) extendable×120mm(T)
Spindle revolutions 6000-12000rpm
Processing speed 0-2m/min
cutting angle 0-600
Steam pressure input ≥0.5mpa
Total power 3.5kw
Machining Linear Accuracy 0.03mm
Processing methods Spindle feed
depth of cut 0-1mm

Application Features

The polishing accuracy of the whole machine is greatly improved, the mirror effect is obvious, there is no residual knife mark, the polishing efficiency is increased by 1.6 times, and the processing cost is greatly saved. The whole machine runs stably, the main shaft beats little, and the noise is low.

Online consultation