Precautions for using YSA precision servo tapping power head

2022-9-9

YSA servo power head is a high-precision ball screw as the feed, which is controlled and assembled by two servo motors. This dual-servo structure drilling power head is a high-precision power head that can tap and drill.

Thanks to this special control method, the feeding is accurate, the feeding force is large, and the forward and backward are stable. The company's power head spindle rotates with a servo motor, the speed is not limited, and it is suitable for machining of hollow and screw threads of various specifications;

And the servo power head is easy to control, fully automatic control system, easy to install and easy to adjust. Servo power heads are favored by users because of their unique advantages.

When using the servo power head, you should pay attention to those problems.
1. The manual must be read carefully before operation.
2. Clean the ball screw every day and add compliant lubricating oil.
3. It is strictly forbidden to hit and collide with the servo motor and driver, and do not hit the position of the chuck
4. Do not pull the outer wire of the motor with force, keep the wire connection dry and clean
5. The tap or drill must be installed in the correct way, not hard plugged or hard pulled
6. To ventilate the drive, be sure to add a cooling fan to ensure the heat dissipation of the electric box
7. Tapping oil or cutting fluid corresponding to the processing material must be added when tapping.
8. The servo power head is assembled with double servo motors. In order to better protect the performance of the servo power head, be sure to prevent water or oil from entering the servo motor and drive.
The reason why the servo power head is widely used is that thanks to its powerful function, it can be applied to various occasions, and the type of drilling and tapping can be switched through the program to achieve the purpose of quick operation of one-key switching.